When it comes to preparing the ground, a very common question arises: subsoiler or cultivator. These are two soil-preparation implements that are often confused, yet they work at different depths and solve different problems. Choosing the wrong one means burning fuel without getting the result you are after. This guide clarifies what each one does, when to use them and how they complement each other in the farm’s tillage plan.
What a subsoiler does
The subsoiler is a deep-tillage implement. Its sturdy, widely spaced tines penetrate below the compacted layer and fissure it at depth without turning the soil over or mixing the horizons. Its job is not to prepare the seedbed but to break the plough pan, improve water infiltration and let roots go down. It is the right tool when the problem is deep in the profile, not at the surface. You can see the different set-ups in the JYMPA subsoilers range.
When to use the subsoiler
- When a compacted layer or plough pan is holding back water and roots.
- After harvest, to decompact before the autumn rains.
- On fields with waterlogging or poor infiltration.
- When you want to improve the profile without inverting the soil or burying surface organic matter.
What a cultivator does
The cultivator works shallower and with a different purpose. Its more numerous, lighter tines stir and loosen the top layer, cut weeds, incorporate stubble and refine the soil to prepare a good seedbed. It is a secondary-tillage implement, meant to condition the top few centimetres, not to break deep layers. You will find different models in the cultivators range.
When to use the cultivator
- To prepare the seedbed after a deeper pass.
- To control weeds mechanically at the surface.
- To incorporate stubble and refine the soil before sowing.
- To keep the top layer loose between operations.
Subsoiler or cultivator: the key differences
The simplest way to decide is to think about depth and purpose. The subsoiler goes deep to fissure; the cultivator stays shallow to condition.
- Depth: the subsoiler works below the plough pan; the cultivator in the top few centimetres.
- Purpose: decompact and improve infiltration versus prepare the seedbed and control weeds.
- Effect on the soil: the subsoiler fissures without turning; the cultivator stirs and loosens the surface.
- Power needed: deep tillage demands more traction than shallow tillage.
Not rivals: they complement each other
In practice, subsoiler and cultivator do not compete; they are part of the same work sequence. The usual approach is to decompact deep first, when the diagnosis calls for it, and then refine the surface to leave the seedbed ready. When you want to cut the number of passes —and with it fuel use and traffic compaction— combined equipment integrates several functions in a single pass. It makes sense to subsoil only when there is deep compaction, and to turn to the cultivator for the more frequent surface conditioning.
How to decide in your field
To choose wisely, the starting point is always a soil diagnosis. A soil pit and a hand penetrometer will tell you whether there is a compacted layer at depth or whether the problem is limited to the surface. From there, the decision is simpler than it seems:
- If there is a plough pan or deep compaction: start with the subsoiler.
- If the profile is healthy and you only need to prepare for sowing: the cultivator is enough.
- If you want to cut passes and the soil allows it: consider combined equipment.
Always working the soil at the right moisture and avoiding unnecessary tillage will extend the service life of both implements and, above all, keep your soil in better condition for longer.
Conclusion
The choice between subsoiler or cultivator is not about which is better but about which problem you want to solve: breaking a deep compacted layer or preparing the surface for sowing. Diagnose your soil, define the goal and choose accordingly. If you are unsure about the ideal set-up, the JYMPA team can help you choose between its subsoilers and its cultivators.



